Computer – die neusten Beiträge

Mit 820-870 Euro "Gaming-PC"-Setup möglich in WQHD bis 144Hz zu zocken?

Setup hier:

  • https://www.amazon.com/dp/B07STGGQ18?tag=pcpapi-20&linkCode=ogi&th=1&psc=1 Ryzen 5 3600
  • https://www.amazon.com/dp/B07XH4SK17?tag=pcpapi-20&linkCode=ogi&th=1&psc=1 B450M M2 Max
  • https://www.amazon.com/dp/B07MNJP6RW?tag=pcpapi-20&linkCode=ogi&th=1&psc=1 Crucial Ballistix Sport DDR4-3200MHz 16GB (2x8)
  • https://www.amazon.com/dp/B07J2WBKXF?tag=pcpapi-20&linkCode=ogi&th=1&psc=1 Crucial P1 500GB SSD (ist die schnell genug in Schreiben/Lesen?)
  • https://www.amazon.com/dp/B07WN6WB4G?tag=pcpapi-20&linkCode=ogi&th=1&psc=1 RTX 2070S Gaming OC
  • https://www.amazon.com/DEEPCOOL-MATREXX-30-Mini-Tower-Air-Intake/dp/B07QZDM8K4/ref=sr_1_7?crid=2BC9B55O3TMED&keywords=micro+atx+case&qid=1580052268&sprefix=micro+a%2Caps%2C264&sr=8-7 Deepcool Matrexx (falls zu schwache/wenige Lüfter, welche dann?)
  • https://www.amazon.com/EVGA-100-BR-0450-K1-Bronze-Power-Supply/dp/B07DTP6SLJ/ref=sr_1_2?crid=1QNZZQIIOBS5D&keywords=450w+power+supply&qid=1580052405&sprefix=450w+%2Caps%2C248&sr=8-2 450W 80+ Bronze Netzteil

Es ist auch kein Problem, nach Österreich (einzeln) zu liefern, weil alles gratis (hoffentlich) aus Amerika geliefert wird (kein Problem, dass ich 1 Woche warte).
Hier alles in Deutschland und Österreich ist vieles überteuert (z.B. der Ryzen kostet umgerechnet in Euro 162, in Österreich und Deutschland um die 200. Schreibt mal was ihr denkt! =)

PC, Computer, Technik, Gaming, AMD, WQHD, Spiele und Gaming, Ryzen , Nvidia GeForce RTX

Arduino Fehlermeldung programmer not responding?

Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino/Genuino Uno"

Der Sketch verwendet 724 Bytes (2%) des Programmspeicherplatzes. Das Maximum sind 32256 Bytes.

Globale Variablen verwenden 9 Bytes (0%) des dynamischen Speichers, 2039 Bytes für lokale Variablen verbleiben. Das Maximum sind 2048 Bytes.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x8d

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x8d

Problem beim Hochladen auf das Board. Hilfestellung dazu unter http://www.arduino.cc/en/Guide/Troubleshooting#upload.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x8d

Dieser Bericht wäre detaillierter, wenn die Option

"Ausführliche Ausgabe während der Kompilierung"

in Datei -> Voreinstellungen aktiviert wäre.

Was machen?

Computer, Technik, programmieren, Arduino

Meistgelesene Beiträge zum Thema Computer