Fremdsprache & Übersetzung

Deinem Englischaufsatz fehlt der letzte sprachliche Feinschliff? Oder überlegst Du, eine neue Sprache zu lernen und suchst ein paar Erfahrungsberichte? Dann stelle hier Deine Frage zu Fremdsprachen & Übersetzungen.

36.426 Beiträge

Meinung für ein Buch Kapitel 1?

Also ich habe einen Buch angefangen zu schreiben und habe vor das als erstes Kapitel zu nehmen: Ist english. ^^

TW: Su!z!d

_____________________

My mother died when I was four, and I was a part of the plan. She killed herself while I was playing with my dolls. Our maids had left for some minutes without any explanation. It was just me and her. I don't think she'd planned it all the way through. Who ends their life with a child sitting beside them?

She tied a rope to the wardrobe as I made tea for my dolls. I remember looking up and asking, “Are you making a swing, Mommy?”

She smiled, but not like she used to. It was strange and crooked, like it was borrowed. “Yes, darling. Mommy wants to swing a bit. Don’t tell Daddy, yeah?”

I nodded, smiling wide. Me and Mommy had a secret now,our very own secret. I'd always wanted one, like other kids said they had with their moms. I never imagined it would be this.

She pulled a chair into place and turned to me. “When Mommy swings, I want you to take the chair away, okay baby? That’s how my swing works.”

I hesitated. Something about it felt wrong. But she was smiling and I loved her, so I nodded again. Eager to please.

I did exactly what she asked. When she began to sway, I pulled the chair back. When her face turned strange, blue and bloated, I turned around like she'd told me to.

I thought I’d done something good.

The room was quiet until the door burst open. My father’s voice shattered everything. A gasp. Heavy footsteps. Then he turned me around fast, grabbing my shoulders, demanding to know what happened. He was shouting, and he was crying. Daddy never cried.

“Mommy told me not to tell,” I said proudly, like I’d done well. “It’s a secret.”

He stopped breathing for a moment, staring past me. I followed his eyes to Mommy, no longer swinging.

And then he slapped me.

My head snapped to the side. My cheek stung. I started crying. I didn’t understand. I had done what she told me to do. I had helped.

I ran to my mother. She was still there, hanging, her toes a few centimeters off the ground. I shook her gently. “Mom! Mom! Dad slapped me!”

But she didn’t wake up. She didn’t move. I didn’t understand what death was. I didn’t understand why he hit me.

Even now, I’m not sure if I deserved it.

________________________________

Wäre es so in ordnung? Würdet ihr sowas lesen?

Im Buch wird es halt um das Mädchen gehen und bla bla ihr Vater will einen Bodyguard für sie suchen bla bla. Ihr geht es mental natürlich bombastisch schrecklich. Bla bla. Am ende kommen die zsm oder so. Oder sie bringt sich um. Naja. Wäre es okay so zu starten?

how can i fix the Error "package.json"?

[übersetzt]

Hallo zusammen,

ich habe ein Problem. Es geht um die Änderung eines Quellcodes für einen 3D-Drucker, den ich von Knutwurst heruntergeladen habe. Es handelt sich um einen Quellcode für den Anycubic Mega P mit DGUS Clone Screen, Tmc2208 Treiber, BlTouch. Ich möchte ihn mit Visual Studio Code bearbeiten, aber jedes Mal stoße ich auf das im Titel beschriebene Problem, egal ob mit der neuesten Version oder einer älteren Version. Ich habe die Anweisungen im Knutwurst-Wiki befolgt, zuerst den Quellcode herunterladen, dann in VSC öffnen und die Version auf dem entsprechenden Drucker auswählen, schließlich (build) drücken, um das erste Mal zu kompilieren. Der letzte Schritt gibt immer den gleichen Fehler.

Habe auch alles mögliche mit Arduino Ide versucht, aber keinen Erfolg gehabt

Mehr Informationen hier:

Version von Visual Studio Code

Den neuesten Quellcode habe ich schon ausprobiert

1.5.4

1.3.1

  • Name des Quellcodes: MEGA_P_DGUS_TMC_BLT_10_v1.5.4.hex

Ich muss den Quellcode ändern, sonst kann ich die neue Leistung der Heizpatrone und des Lüfters nicht ändern.

Ich brauche dringend Hilfe und werde leider ungeduldig, ich bastle schon seit Monaten am 3D-Drucker und jetzt scheitert es am Quellcode.

Ich muss den Quellcode ändern, sonst kann ich die neue Leistung der Heizpatrone und des Lüfters nicht ändern.

Original

Hi everyone,
i have a really impatient problem. It's about changing a source code for a 3D printer that I downloaded from Knutwurst. It is a source code for the Anycubic Mega P with DGUS clone screen, Tmc2208 driver, BlTouch. I would like to edit it with Visual Studio Code, but every time I run into the problem as described in the title no matter with the latest version or an older version. I followed the instructions at the Knutwurst Wiki, first download the source code, then open it in VSC and choose the version on the appropriate printer, finally press (build) to compile for the first time. The last step always gives the same error.
Also tried everything possible with Arduino Ide, but had no success
More information here:
Version of Visual Studio Code

The newest
Source Code i tried allready

1.5.4
1.3.1
Name of Source Code

MEGA_P_DGUS_TMC_BLT_10_v1.5.4.hex
I have to change the source code, otherwise I can't change the new power of the cartridge heater and the fan.
I urgently need help and unfortunately I'm getting impatient, I've been tinkering with the 3D printer for months and now it fails because of the source code.
I have to change the source code, otherwise I can't change the new power of the cartridge heater and the fan.

Bild zum Beitrag
Ask Me Anything: Themenspecials
Im gutefrage Themenspecial beantworten Verbände, Organisationen und Personen des öffentlichen Lebens Deine Fragen zu aktuellen Themen.
AMA: Tabuthema Wechseljahre (mit der Influencerin blondbynana)
15 beantwortete Fragen
AMA Reality-TV-Datingshows: Deine Fragen an Denise und Lorik
10 beantwortete Fragen