bei flashen kommt immer diese Fehler Meldung:

Sketch uses 399777 bytes (30%) of program storage space. Maximum is 1310720 bytes.

Global variables use 23564 bytes (7%) of dynamic memory, leaving 304116 bytes for local variables. Maximum is 327680 bytes.

Flashing with command:C:/Users/Anwender/.arduino-create/esp32/esptool_py/4.5.1/esptool.exe --chip esp32s3 --port COM3 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 C:/Users/Anwender/AppData/Local/Temp/extrafiles2604286391/new_sketch_1737046520512.bootloader.bin 0x8000 C:/Users/Anwender/AppData/Local/Temp/extrafiles2604286391/new_sketch_1737046520512.partitions.bin 0xe000 C:/Users/Anwender/AppData/Local/Temp/extrafiles2604286391/tools/partitions/boot_app0.bin 0x10000 C:/Users/Anwender/AppData/Local/Temp/arduino-create-agent551068969/new_sketch_1737046520512.bin

esptool.py v4.5.1

Serial port COM3

Connecting...

A serial exception error occurred: Write timeout

Note: This error originates from pySerial. It is likely not a problem with esptool, but with the hardware connection or drivers.

For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html