Sketch :
#include <SPI.h>
#include <MFRC522.h>
#define SS_PIN 10
#define RST_PIN 9
#define LED_G 5 //definiere die grüne LEDD
#define LED_R 4 //definiere die rote LED
#define RELAY 3 //relai pin
#define BUZZER 2 //buzzer pin
#define ACCESS_DELAY 6000
#define DENIED_DELAY 2000
MFRC522 mfrc522(SS_PIN, RST_PIN); // RFID Leser
void setup()
{
Serial.begin(9600); // Initiate a serial communication
SPI.begin(); // Initiate SPI bus
mfrc522.PCD_Init(); // Initiate MFRC522
pinMode(LED_G, OUTPUT);
pinMode(LED_R, OUTPUT);
pinMode(RELAY, OUTPUT);
pinMode(BUZZER, OUTPUT);
noTone(BUZZER);
digitalWrite(RELAY, HIGH);
Serial.println("Put your card to the reader...");
Serial.println();
}
void loop()
{
// Look for new cards
if ( ! mfrc522.PICC_IsNewCardPresent())
{
return;
}
// Select one of the cards
if ( ! mfrc522.PICC_ReadCardSerial())
{
return;
}
//Show UID on serial monitor
Serial.print("UID tag :");
String content= "";
byte letter;
for (byte i = 0; i < mfrc522.uid.size; i++)
{
Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");
Serial.print(mfrc522.uid.uidByte[i], HEX);
content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "));
content.concat(String(mfrc522.uid.uidByte[i], HEX));
}
Serial.println();
Serial.print("Message : ");
content.toUpperCase();
if (content.substring(1) == "43 63 64 00") //change here the UID of the card/cards that you want to give access
{
Serial.println("Authorized access");
Serial.println();
delay(500);
digitalWrite(RELAY, LOW);
digitalWrite(LED_G, HIGH);
delay(ACCESS_DELAY);
digitalWrite(RELAY, HIGH);
digitalWrite(LED_G, LOW);
delay(200);
tone(BUZZER, 200);
digitalWrite(LED_R, HIGH);
delay(200);
digitalWrite(LED_R, LOW);
delay(200);
digitalWrite(LED_R, HIGH);
delay(200);
digitalWrite(LED_R, LOW);
noTone(BUZZER);
}
else {
Serial.println(" Access denied");
digitalWrite(LED_R, HIGH);
tone(BUZZER, 300);
delay(DENIED_DELAY);
noTone(BUZZER);
digitalWrite(LED_R, LOW);
delay(500);
digitalWrite(LED_R, HIGH);
delay(500);
digitalWrite(LED_R, LOW);
delay(500);
digitalWrite(LED_R, HIGH);
delay(500);
digitalWrite(LED_R, LOW);
delay(500);
digitalWrite(LED_R, HIGH);
delay(500);
digitalWrite(LED_R, LOW);
}
}