Handy hat extrem schechtes inet ..warum?

...komplette Frage anzeigen

2 Antworten

Flash ma die Stock Rom neu, wenn das Problem besteht, hast du Hardware Problem.

Antwort bewerten Vielen Dank für Deine Bewertung
Nowayy 18.04.2016, 22:32

Kannst du mir bitte erklären wie das geht?

0
R3HAX 18.04.2016, 23:24

Alles auf eigene Verantwortung!
.
.
Stock ROM flashen:

Flash Samsung Stock ROM (Official/Original Firmware) via Odin 

Step 1: Download and install device driver software on your computer. 

Visit Samsung official website to find the correspondent driver software. 
Google the driver software of your device. Download and then install it on you computer. 
Download or update Kies, part of which will install or update drivers. 
Once drivers are installed or updated, it is highly recommended that you restart your computer. 

Step 2: Download and extract the Stock ROM (Official/Original Firmware). 
SamMobile may be the best choice to download stock firmware of Samsung device. Or you can go to Samsung Updates, XDA Forum or Google to find the correspondent firmware of your device. Samung Stock Firmware Download on SamMobile 

Click "Firmware" and enter your device model 

Select country or type in certain info to filter, eg.Baseband version. 

After downloading it (normally a compressed file), you need to extact/unzip it to certain location of your PC. The file types that Odin uses are *.bin,*.tar and *.tar.md5. 

Find the file you have downloaded and then unzip it to Desktop. 

You will find a *.md5 file after extracting. 

Step 3: Download and extract Odin on you PC. 
You can download Odin V3.10.7 directly from SamMobile. AndroidMTK is a fine alternative, it also offers a detailed list of Odin versions and download link. Or you can always Google "Odin download". 

After downloading it on your PC, extract it to Desktop or another location you'd prefer.Odin v3.10.7 downloaded from SamMobile 

After extracting, right-click to "Open as Administrator". It may prevent certain issue from happening. 

Run Odin as administartor is recommended. 

Step 4: Boot your Samsung device into Download mode. 
Follow these steps to enter Download Mode/Odin Mode 

Power off your device 
Press and hold Volume Down key, Home Key and Power Key 
When your device vibrates, release Power key while keep holding the Volume Down key and Home key 
Boot into download mode 
Warning before entering into download mode 

Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!) 
Boot into download mode 
Now you are in download mode. 

Step 5: Connect your device to PC. 
You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). 

Connect device to Odin 

Device is connected to Odin. 

Step 6: Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start". 
Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". 

Add *.md5 to Odin. 

After adding the file, click "Start" to begin the flashing process. 

Click "Start" to flash. 

WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN. 

Starting to flash stock rom via Odin 

Ongoing flashing process. Do not remove your device. 

When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device. 

Succeed to flash stock rom via Odin 

Do this on your own risk ! I`m not responsible for bricked devices !
Using GF app causes bad looking instructions.

0

Generell Internetprobleme? WLAN Antenne im Gerät könnte defekt sein.

Antwort bewerten Vielen Dank für Deine Bewertung

Was möchtest Du wissen?