1

Bilder auf PC werden nach Bearbeitung auf "versteckt" gesetzt

Frage von Loxten Loxten

Hallo Community,

wenn ich Bilder auf meinem PC bearbeite (z.B. drehe oder farblich korrigiere), werden diese in ihren Eigenschaften auf "versteckt" gesetzt. Ich kann sie dann nur noch ansehen, wenn ich die entsprechende Ordneroption einschalte. Ich kann bei "Eigenschaften" das Häkchen für versteckt wieder abwählen, dann ist das Bild wieder normal sichtbar, aber nur bis zur nächsten Änderung.

Mein Betriebssystem ist Windows 7, und ich benutze die normale Windows-Fotoanzeige.

Weiß jemand eine Erklärung und - besser noch - eine Abhilfe dafür?

Fragen zu gleichen Themen finden

Antworten (3)

  • 0
    Hilfreichste Antwort ausgezeichnet vom Fragesteller
    Antwort von Neraphtar Neraphtar

    Hallo.

    Nachdem ich jetzt ein wenig rumprobiert habe... ha... da funktionierts...

    Vielen Dank. Das war der Tipp des Jahrhunderts... ich hab schon lange nach einer Antwort gesucht.

    Bin gespannt, was sich dann ergibt, wenn McAfee ein entsprechendes Update herausbringt, ob dann was Neues entsteht... :)

    Also, bis dahin, nochmal vielen Dank und viele Grüße, Nera

  • 1
    Antwort von selima123 selima123

    Es kann sein, dass die Rechte bzw. Attribute von einem Überverzeichnis vererbt werden, so dass deine Einstellung auf ein Subfolder nicht lange hält, also nur bis zum Reboot.

    Kommentar von Loxten Loxten

    Danke, das war ein guter Tip!

    Die Fotos sind im Ordner "Bilder", und dort in einem weiteren Unterverzeichnis. Ich bin jetzt auf den obersten Ordner "Bibliotheken" gegangen, habe mit der rechten Maustaste draufgeklickt und die Option "Standardbibliotheken wiederherstellen" gewählt. Und siehe da, jetzt werden die Fotos nicht mehr versteckt nach einer Änderung. Warum wieso weshalb weiß wohl nur Bill Gates.

    VG Loxten

  • 0
    Antwort von Neraphtar Neraphtar

    Hallo,

    ich habe leider das gleiche Problem und habe mittlerweile auch schon den Tip ausprobiert... ohne Erfolg.

    Bei mir ist es sogar so, dass eine Musikdatei, wenn ich das Cover manuell einfüge (über Media Player) ebenso versteckt wird.

    Wenn ich jedoch eine Bilddatei auf meinem NAS Laufwerk ändere bleibt sie sichtbar...

    Gibt es irgendeine andere Lösung dafür?! Das nervt nämlich gewaltig... :)

    Gruß, Nera

    Kommentar von Loxten Loxten

    Hallo Nera,

    mittlerweile habe ich das Problem gelöst. Es hängt zusammen mit dem Zugriffsschutz des McAfee Virenscanners. Im Prinzip musst Du im McAfee einmal den Zugriffsschutz ausschalten, dann ein Script laufen lassen, und danach den Zugriffsschutz wieder einschalten.

    ECHO You need to disable Access Protection! ECHO 1. Open SecurityCenter ECHO 2. Click Navigation ECHO 3. General Settings and Alerts ECHO 4. Expand Access Protection ECHO 5. Uncheck the "Use Access Protection" checkbox ECHO 6. Click Apply

    Anschließen Script ausführen:

    @echo off color 1e TITLE Attrib -H on All Drives REM ########################################## REM # Run Attrib -H on all drives REM ##########################################

    ECHO Warning, this Batch File will run Attrib -h on all drives. ECHO If you don't wish to unhide your files please close the window now. ECHO To proceed ... Pause

    for /F "usebackq tokens=1* delims= " %%i in (fsutil fsinfo drives) do SET DRVS=%%j for %%b in (%DRVS%) do CALL :SHLCHK %%b GOTO END

    :SHLCHK SET DRV=%1 CD /d %DRV% ATTRIB -H . /S /D GOTO:EOF

    :END pause exit

    Anschließend Zugriffsschutz wieder setzen und PC neu starten

    ECHO Please re-enable Access Protection ECHO 1. Open SecurityCenter ECHO 2. Click Navigation ECHO 3. General Settings and Alerts ECHO 4. Expand Access Protection ECHO 5. Check the "Use Access Protection" checkbox ECHO 6. Click Apply ECHO 7. Reboot

    Das Ganze gibt es auch auf der McAfee Supportseite, allerdings nur, wenn man auf die amerikanische Seite wechselt und etwas herumsucht. Oder Du kontaktierst den Support per Email.

    Bei mir hat es funktioniert, und meine Bilddateien werden nicht mehr versteckt.

    Viel Erfolg! VG Loxten

    Kommentar von Loxten Loxten

    Hallo Nera,

    hier nochmal der Originaltext von McAfee:

    Document ID: TS101228 Printer-Friendly View Rate This Solution

    Files missing on Windows 7 computers

    Environment Affected Suites: Total Protection 2011 Internet Security Suite 2011 AntiVirus Plus 2011

    Affected Products: VirusScan

    Affected Operating Systems: Windows 7

    NOTE: If you are unsure what version of the McAfee Security software you have installed, please see article TS101107.

    Problem Windows 7 contains a new feature concept called the Library, which groups similar types of documents and media from several physical folders into one virtual Library.

    When a new user is created, during or after the computer setup, the user’s unique Library is created with four default Libraries: Documents Movies Music Pictures Functions in the 2011 McAfee VirusScan could cause the files inside these four default Libraries to become hidden, making it difficult to find them in the Windows Explorer after you edit and save them. The files do exist, but they have a ‘hidden’ attribute that prevents them from being displayed when Windows Explorer is using its default Folder Options settings.

    Solution McAfee will release an update to VirusScan that will change the way these file attributes are set and eliminate this issue.

    Workaround Until the planned update is released, use the following procedure to work around this issue.

    IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, ensure that you create a backup and that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, see the following Microsoft KnowledgeBase article: http://support.microsoft.com/kb/256986/EN-US/. Save the files listed below to your desktop:

    jetzt kommen 2 links: download.mcafee.com/products/licensed/custsupportpatches/McTMP2LOG.bat sowie: download.mcafee.com/products/licensed/custsupportpatches/McAttrib-H.cmd

    Right-click McTMP2LOG.bat and select Run as Administrator. After the script completes, double-click the M Icon. Click Navigation in the top, right corner. Select General Settings and Alerts. Open the Access Protection drawer. Select the Use Access Protection option. Click Apply. Close SecurityCenter. Right-click McAttrib-H.cmd and select Run as Administrator. After the script completes, restart your computer.

    Rate this document 1 2 3 4 5(Best) Did this article resolve your issue? No Yes Please provide any comments below

    Gruß Loxten

Diese Frage

Verwandte Fragen

Noch nicht den richtigen Rat gefunden?

Einfach und schnell viele hilfreiche Ratschläge von Deutschlands aktivster Ratgeber-Community erhalten!

Einfach und schnell einen Tipp erstellen und Ihren guten Rat mit anderen teilen!

Einfach und schnell ein Video hochladen und anschaulichen Rat an alle geben!

Die unter gutefrage.net angebotenen Dienste und Ratgeber Inhalte werden nicht geprüft. Die Richtigkeit der Inhalte wird nicht gewährleistet. Rechtliche Hinweise finden Sie hier.